Materials:                                                                                                                                                                                                                                                                                                                                                                                         
 
   Samsung

ABS, ASA, SAN, PC/ABS, mPPE, PPS:

            (Glass Filled; Mineral Filled; Impact Modified; Colors; Custom Compounds).......


                   Please get in touch for your specific need or interest: 770-483-6977  or  samsung@polymersales.com


                   FOR MORE IMMEDIATE INFORMATION:  www.samsungstarex.com







DATA SHEETS OF PHYSICAL PROPERTIES FOR SELECTED MATERIALS:


 


  ABS/Polycarbonate Alloys.....                Ask also about  SamsungHIPS, GPPS, ABS, SAN

                                                                                                             http://www.polymersales.com/contact.html





                         

Polystyrene:                                                    Ask also about  SamsungHIPS, GPPS, ABS, SAN
                                                                                                           http://www.polymersales.com/contact.html
  Silicone Filled                                                     







 

 
Polypropylene:

  Talc Filled
  Calcium Carbonate Filled
  Glass Fiber
  Combination of fillers
  Super High Impact










                                  
Polyethylene:
Calcium Carbonate Filled
  Fiberglass Filled








 
         Purging Compound                         


                      
  Chemical Purging Compounds for All Thermoplastics Processing Machinces
 
                                    




Polypropylene Compounds
(Calcium Carbonate Filled)
MATERIAL TYPE
CaCO3/HOMOPOLYMER
CaCO3/COPOLYMER
Part No. P2120 P2130 P2140 P2150 P2220 P2230 P2240 P2250
Calcium Carbonate % 20 30 40 50 20 30 40 50
Density g/ml (D792) 1.05 1.15 1.25 1.35 1.05 1.15 1.25 1.35
Durometer Shore D (D2240) 71 74 77 80 69 70 72 75
Tensile Strength psi (D638M) 4400 4000 3600 3200 3500 3350 3200 3150
Tensile Mod. x100K psi (D638) 3.1 3.6 3.8 4.0 2.9 3.2 3.5 3.8
Flex Mod. x100K  psi (D790M) 2.4 3.0 3.8 4.4 3.1 3.0 3.0 2.9
Flexural Strength psi (D790M) 4200 5200 6200 7200 4000 4450 4900 5350
Izod Impact Notched ft.lb./in. 0.5 0.5 0.5 0.3 1.2 1.1 1.0 0.9
Heat Distortion @







C at 66 psi 93 99 107 115 87 94 101 118
C at 264 psi 68 70 72 74 54 57 60 63
Mold Shrink in/in  (D955) .015 .014 .012 .010 .015 .014 .014 .013


All values are approximations for general design planning only. Please request specific and detail physical characteristics and attributes. You should check with the vendor before processing this material or assuming characteristics.

wsmith

 
Combination Mineral Filler
Part No. P9230
Property Average Value ASTM Method
Mineral Content, % 30 N/A
Melt Flow, g/10 min. 7-12 D1238
Specific Gravity, g/cm^3 1.15 D792
Tensile Strength, psi  @73 F  3,800  D638
Flexural Modulus, (Tangent)  psi  320,000  D790
Izod Impact, ft-lb/in @73F Notched 1/2" x 1/8" 0.8 D256
Gardner Impact, in-lb 30 D3029
Heat Deflection, F

@264 psi 150 D648
@  66 psi 220 D648
Hardness Shore "D" 74 D2240

All values are approximations only and are to be used for general design purposes only. Customer should request specific and detail physical characteristics from vendor. Consult with vendor before processing this material or assuming any characteristics.



 
Fiberglass Reinforced Polypropylene
Super High Impact
Part Numbers: P8210; P8220; P8230
Property ASTM Method
Average Values
Fiberglass Content %
10 20 30
Melt Flow, g/10 min. D1238 7-12 12-20 7-12
Specific Gravity, g/cm^3 D792 0.97 1.04 1.13
Tensile Strength, psi @73F D638 5,200 6,100 6,700
Flexural Modulus, (Tangent) psi D790 310,000 400,000 540,000
Izod Impact, ft-lb/in @73F Notched 1/2" x 1/8" D256 4.0 4.0 4.0
Gardner Impact, in-lb D3029 40 40 40
Heat Deflection, F



@264 psi D648 225 0230 240
@ 66 psi D648 245 250 260
Hardness Shore "D" D2240 39 71 75

All values are approximations and are to be used for general esign work only. Request specific and detail physical characteristics and attributes from vendor. Consult with vendor before processing this material or assuming any characteristics.



 
Polypropylene Compounds
(Talc Filled)
MATERIAL TYPE TALC/HOMOPOLYMER
TALC/COPOLYMER
Part No P1120 P1140 P1220 P1225
TALC   % 20 40 20 25
Density g/ml (D792) 1.04 1.20 1.04 1.15
Durometer Shore (D2240) 72 74 70 68
Tensile Strength psi (D638M) 4900 4100 4500 3800
Tensile Modulus x100K psi (D638) 3.3 3.4 2.8 3.3
Flexural Strength psi (D790M) 6300 6800 5700 5500
Flexural Modulus x100K (D790M) 3.3 3.8 2.8 3.4
Izod Impact Notched ft.lb/in 0.5 0.4 1.0 0.5
Heat Distortion @



Deg. C  at 66 psi 117 133 116 127
Deg. C at 264 psi 73 84 63 78
Mold Shrinkage in/in (D955) .016 .012 .014 .015

All values are approximations for general design planning only. Please request specific and detail physical characteristics and attributes. You should check with the vendor before processing this material or assuming any characteristics.



 
Super High Impact
(Rubber Modified - P2535)
MATERIAL PROPERTIES METHOD UNITS VALUES
Mineral %

35
Density D729 g/ml 1.20
Tensile Properties: D638

Strength
psi 2600
Modulus
psi 145000
Elongation at Yield
% 12
Elongation at Break
% >500
Flexural  Properties: D790

Strength
psi 3600
Modulus
psi 161000
Izod Impact Properties D256

Notched at 23 Deg. C.
ft. lb./in. >10
Heat Distortion @: D648

66 psi
203 Deg. F. 95 Deg. C.
264 psi
115 Deg. F. 46 Deg. C.
Coef. of Linear Termal Expansion D696 0.00001 in./in. Deg. F. 4.0
Impact Resistance (Falling Wt. @23 Deg. C.) D5420 ft.lb./in. approx. 250
Mold Shrinkage (linear) D955 in/in. 0.017
Flammability UL94
HB

All values are approximations for general design planning only. You should check with the vendor before processing this material or assuming any characteristics. Contact vendor for specifications.




We are known by the companies we serve.
Custom COLORS. U.V. Protection.
U.L. & Specifications Certifications
Ask Us:
Phone: 770-483-6977 Cell: 770-365-0810  Fax: 770-483-7426 
E-Mail: wsmith@polymersales.com


  Home                                       About Us                       Contact Us  



 


VanDerGraff Inc. © 2009